100 mesh brass wire mesh

100 mesh plain weave brass wire mesh

Standard

u GB/T 5330.1-2000,  GB/T 19628.2-2005

u Anping Web Wire Mesh Co.,LTD Plain Weave Process and Technical Parameter

Brief description

100 mesh plain weave brass wire mesh including 100 wires and openings of 1 inch Using 0.07-0.10mm diameter wire, by plain weaving, woven 100 mesh opening for 0.15-0.18mm solid particles , it can also be used as a liquid, gas filter support material or protective fabrics to use. This wire diameter and mesh with ratio reasonable, therefore weave structure is very strong. After 13 whole weaving process, so that the mesh surface flatness better.

Material

u CuZn40 CuZn37 CuZn35 CuZn30 CuZn20 CuZn5

Technical parameter

roll width: 0.914m, 1.0m, 1.22m

roll length: 30m

Application

u Chemical Filtration

u Fiber Spinning Mesh

u Decorative Mesh

u Oil Strainers

u Test Sieves

u EMI/RFI shielding mesh

100 mesh plain weave brass wire mesh packing

Brass wire mesh is packed in rolls,winding on a paper tube,wrapped in moisture-proof paper or plastic film,

outside wooden cases or wooden pallet.